Regeneration Fitel S943, S943B 11,1V li-ion

Regeneration Fitel S943, S943B 11,1V li-ion

Reference S943

zł169.11

Tax included

Voltage: 11,1V
Cells type: Li-ion
Cells brand: Samsung / Sanyo
Warranty: 12 months

Battery capacity after regeneration/cell manufacturer/warranty

We’ll plant a tree!

For orders over 70 €, we’ll plant a tree on your behalf and send you a certificate confirming its planting.

Remaining: zł300.00!

Fitel S943, S943B 11.1V Li-Ion Battery Regeneration Procedure

The process of restoring Fitel S943, S943B 11.1V Li-Ion batteries involves several key steps. Initially, we conduct a detailed inspection of the casing, cells, and other essential electronic components. All cells are replaced with new ones, avoiding partial substitutions that could negatively impact the battery's durability. In case of damage or cracks in the casing, we proceed with its replacement.

The first step in the cordless power tool battery regeneration process is the disassembly and replacement of each cell with a new one. We then thoroughly analyze the condition of the electronic system of the battery, including thermistors and resistors, which are replaced if necessary. After replacing the cell, we integrate it with the electronic system and terminal connections. Once the battery is reassembled, we meticulously clean it from any accumulated contaminants. The process concludes with a functionality test to ensure the battery operates correctly.

Steps of the Battery Regeneration Procedure:

Disassembly of the casing and removal of used cells
Replacement of cells with complete, new sets
Assessment and control of components and electronics, with the option of replacement with new or more efficient equivalents
Connection of newly installed cells to the electronic system
Careful cleaning of the battery
Reassembly of the casing
Conduction of a functionality test on the battery

The regeneration of Fitel S943, S943B 11.1V Li-Ion batteries follows the original specifications, ensuring precision and safety in the provided service. We also offer the option to use alternative components upon the customer's request to optimize the battery's performance.

Stage of Fitel S943, S943B 11.1V Li-Ion battery regeneration

Benefits and Advantages of Battery Regeneration:

Cost savings – the service cost is lower than purchasing a new battery
Retention of the existing casing – ensures compatibility with the device powered by the battery
Short service completion time
Potential for increased power and battery capacity
Written warranty

Service Completion Timeframe:

The regeneration time depends on the type of battery and the number of orders the service center is handling at a given time.
Average timeframes:

For batteries 7.2V-18V – 2 to 3 working days
For batteries 24V-36V – up to 5 working days

Warranty:

Regenerated batteries are covered by a written warranty, with the duration (6 to 24 months) depending on the selected components used in the regeneration process.
The warranty covers any battery damage occurring during its use after regeneration (capacity drops, short circuits, burnouts, charging errors).

How to Commission Battery Regeneration at Our Company?

To make it convenient for you, we have prepared four ways to commission the regeneration of your battery:

Place an order through our website.
Send your equipment to us along with the order form attached.
Send your equipment to us with your contact details and address attached.
Send us the battery with the completion of our online order form.

Our Address:

Lupo Sp. z o.o.
Strzeszyńska 30B
60-479 Poznań
Poland

Contact Us!

If you have any questions about the regeneration process or need more information about our services, feel free to contact us via email: sklep@lupo-baterie.pl.

upc 3400

ean13 5903940350158

No reviews

Correct using the battery will allow you to enjoy its optimal operation much longer. Learn the golden rules you must follow to extend your battery life.

Temperature matters

Most of us have had the opportunity to find out for ourselves that extreme temperatures badly affect the performance of laptop batteries. Power tool batteries are also sensitive to the thermal conditions in which they operate. Therefore, the battery must not be overheated. If it works for a long time, it is a good idea to take it out of the machine for a quarter of an hour. When it cools down, you can restart it.

Avoid discharge

Another factor that affects battery life is the complete discharge of the battery. If we notice that the efficiency of our device is decreasing, it should be a signal for us to stop its operation. Then connect the battery for charging. Remember that deep discharge is a battery killer.

Give him a break

We don't only need a moment of respite. Your battery also deserves relaxation. Before properly charging it is a good idea to connect the battery for "free charge". This will lower its temperature. Only 5 minutes is enough to restore all parameters after intensive work and increase the efficiency of the proper charging process.

Proper storage

Proper storage conditions of the battery also significantly affect its operation. Unused battery should be charged to the level of 60-70%. It should be placed in a room where the temperature is positive.

Memory effect. How do I get rid of it?

This is a common phenomenon found in NiCd-based batteries. May reduce the maximum capacity of the battery. To avoid this, discharge the battery as much as possible and charge it to 100%. This process is best repeated every three cycles.

Proper use of the battery is not difficult. The above rules should become a habit for every user of power tool batteries. They will save you time and money.

Frequently asked questions ... and answers :-)

I changed the rechargeable battery from NiCd to NiMh. Will I still be able to use my old charger despite this change?

Both NiCd and NiMh cell based batteries are able to operate in the same voltage ranges. They also do not differ in charging current. So this means that there is no problem for a NiCd charger to support a NiMh battery - almost every NiCd charger should be able to handle it. If you have any doubts about the operation of batteries and chargers, please contact our customer service - we will be happy to answer them there.

Do I have to remove the battery from the device each time I finish working?

An unused battery can be left in the device. However, it should be remembered that when it is left there for a long time, it may discharge. To prevent this from happening, it's best to charge it to a level equal to or greater than 60%.

Why is the battery life not always equal to the guaranteed?

This is because the battery life depends on the load on the battery at any given time. Activities such as driving screws use less energy than using a chainsaw. In the first case, the battery will last us longer, in the second, with a current flow above 25A, definitely for a shorter time.

What is the difference between NiCd and NiMh batteries?

NiMh cells are newer models than NiCd cells. The most important advantages they stand out are that they have no memory effect and that their energy density is higher. As a result, NiMh batteries can be recharged at any time without losing their capacity.

Can the old battery be recovered?

If you have a battery that you want to regenerate, please contact our customer service department. We accept almost all, as much as 95%, batteries for regeneration. We have the conditions to prepare almost every cell package available on the market. However, you must remember that the price of the service does not only consist of the cost of the necessary materials. You have to add the cost of the service technician's work.

If I have purchased a battery that does not match my equipment, can I return it?

As we have been selling online for many years, we have extensive experience with this type of situation - we know that mistakes happen. Trying to meet the expectations of customers and not to make them unpleasant disappointment, we have agreed that everyone who buys any product from us has 14 days from the date of purchase to return it.